High Hardness Zeolite Molecular Sieve Desiccant for Sealed Insulating Glass Units IGU
Product Description of Molecular Sieve Desiccant
Molecular sieves are used in sealed insulating glass units to prevent fogging. In sealed double pane windows, condensation of water and solvent vapors can fog up the interior surfaces of the glass. Window fogging occurs when steam trapped between the two panes of an insulating glass unit condenses on the glass surface. This is because the temperature of the glass surface is lower than the dew point of the air between the two panes.
To prevent fogging, the moisture concentration in the double pane window must be controlled. Using this desiccant molecular sieve for insulating glass can absorb moisture better than all commercially available adsorbents, and sometimes they can also remove solvent vapors. When the molecular sieve absorbs moisture or solvent vapor, the moisture vapor concentration in the air space decreases, and the moisture dew point of the empty droplets decreases to a lower value, and condensation cannot occur until the glass temperature is below this value.
Technical Specification of Molecular Sieve Desiccant
|Insulated Glass Drying Molecular Sieve Typical Physical Properties|
|Bulk Density||g/ml ≥||0.80||0.78||0.75|
|Equilibrium Water Capacity @ 25℃||wt% ≥||21||21||21|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||5||15||35|
|Dust(Turbidity Meter)||ppm ≤||30||30||30|
|De4lta T*(10g/10ml H2O)||℃ ≥||38||38||38|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition(950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Package Moisture||wt% ≤||1.5||1.5||1.5|
|The interval values above are based on the different grade of Insulated Glass Desiccant|
Display of Molecular Sieve Desiccant
Package of Molecular Sieve Desiccant
Factory View of Molecular Sieve Desiccant
Attention of Molecular Sieve Desiccant
FAQ of Molecular Sieve Desiccant
Q: Could we send a free sample for reference?
A: Yes, of course.
Q: What about the price and MOQ?
A: We promise a competitive price with top quality, & accept both mass and small quantity order.
Q: What is the lead time?
A: Within 15 days after received payment.
Q: Payment term?
A: 100% TT in advance. or 30% TT deposit & balance before shipment.
Q: How to solve problems after sales?
A: Take photos of the problems. After confirmed, we will make a satisfying solution for you within 3 days.
For More information please contact us. It's our pleasure to serve you.