Globe Zeolite Molecular Sieve Desiccant for Fogging Removal Prevent Condensation
Product Description of Molecular Sieve Desiccant
Molecular sieves are used in sealed IG units to prevent fogging. In a sealed double pane window, condensation of water and solvent vapors can fog up the interior glass surfaces. Window fogging occurs when steam trapped between the two panes of an insulating glass unit condenses on the surface of the glass. This is due to the temperature of the glass surface being below the dew point of the air between the two panes.
To prevent fogging, it is necessary to control the moisture concentration within the dual pane window. Using this desiccant for insulating glass, molecular sieves absorb moisture better than all commercially available adsorbents, and sometimes they can also remove solvent vapors. When the molecular sieve absorbs moisture or solvent vapor, the moisture vapor concentration in the air space decreases, and the moisture dew point of the empty droplets decreases to a lower value, and condensation cannot occur until the glass temperature is lower than this value.
Technical Specification of Molecular Sieve Desiccant
|Insulated Glass Drying Molecular Sieve Typical Physical Properties|
|Bulk Density||g/ml ≥||0.80||0.78||0.75|
|Equilibrium Water Capacity @ 25℃||wt% ≥||21||21||21|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||5||15||35|
|Dust(Turbidity Meter)||ppm ≤||30||30||30|
|De4lta T*(10g/10ml H2O)||℃ ≥||38||38||38|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition(950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Package Moisture||wt% ≤||1.5||1.5||1.5|
|The interval values above are based on the different grade of Insulated Glass Desiccant|
Display of Molecular Sieve Desiccant
Package of Molecular Sieve Desiccant
Factory View of Molecular Sieve Desiccant
Attention of Molecular Sieve Desiccant
FAQ of Molecular Sieve Desiccant
Q: Could we send a free sample for reference?
A: Yes, of course.
Q: What about the price and MOQ?
A: We promise a competitive price with top quality, & accept both mass and small quantity order.
Q: What is the lead time?
A: Within 15 days after received payment.
Q: Payment term?
A: 100% TT in advance. or 30% TT deposit & balance before shipment.
Q: How to solve problems after sales?
A: Take photos of the problems. After confirmed, we will make a satisfying solution for you within 3 days.
For More information please contact us. It's our pleasure to serve you.