High Adsorbing Molecular Sieve Desiccant for Remove fogging in Dual Pane Windows
Product Description of Molecular Sieve Desiccant
Molecular sieves are used in sealed insulating glass units to prevent fogging. Fogging on inner glass surfaces by condensation of water and solvent vapors is common inside sealed dual pane windows. Window fogging arises when the vapors trapped between the two panes of the insulating glass unit condense on the glass surface. This is due to the lower temperature of the glass surface than the dew point of the air between the two panes.
To prevent fogging the moisture vapor concentration inside the dual-pane window must be controlled. Using this desiccant molecular sieves for insulated glass can absorb moisture more than all commercially available adsorbents and sometimes they also can remove solvent vapors. When moisture or solvent vapors are absorbed by the molecular sieves, the moisture vapor concentration in the air space is reduced and the moisture dew point of the airdrops to a lower value and no condensation can occur until the glass temperature goes below that.
Technical Specification of Molecular Sieve Desiccant
|Insulated Glass Drying Molecular Sieve Typical Physical Properties|
|Bulk Density||g/ml ≥||0.80||0.78||0.75|
|Equilibrium Water Capacity @ 25℃||wt% ≥||21||21||21|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||5||15||35|
|Dust(Turbidity Meter)||ppm ≤||30||30||30|
|De4lta T*(10g/10ml H2O)||℃ ≥||38||38||38|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition(950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Package Moisture||wt% ≤||1.5||1.5||1.5|
|The interval values above are based on the different grade of Insulated Glass Desiccant|
Display of Molecular Sieve Desiccant
Package of Molecular Sieve Desiccant
Factory View of Molecular Sieve Desiccant
Attention of Molecular Sieve Desiccant
FAQ of Molecular Sieve Desiccant
Q: Could we send a free sample for reference?
A: Yes, of course.
Q: What about the price and MOQ?
A: We promise a competitive price with top quality, & accept both mass and small quantity order.
Q: What is the lead time?
A: Within 15 days after received payment.
Q: Payment term?
A: 100% TT in advance. or 30% TT deposit & balance before shipment.
Q: How to solve problems after sales?
A: Take photos of the problems. After confirmed, we will make a satisfying solution for you within 3 days.
For More information please contact us. It's our pleasure to serve you.