3a Molecular Sieve Desiccant For General Gas Dehydration
3A molecular sieve has a pore size of 3A or 3 angstrom. Any molecule larger than 3A will not be able to be adsorbed. Mole Sieve is an alkali metal alumino-silicate, the potassium form of the type A crystal structure. 3 Angstrom is created when part of the sodium ions of the 4 Angstrom sieve are replaced by potassium ions.
|Molecular Sieve 3A Typical Physical Properties|
|Item||Unit||8*12 Mesh||4*6 Mesh|
|Bulk Density||g/ml ≥||0.70-0.82||0.65-0.80|
|Equilibrium Water Capacity @ 25℃||wt% ≥||19.0-21.0||19.0-21.0|
|Equilibrium Ethylene Capacity||mg/g≤||3.0||3.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800|
|Crush Strength||Point Contact||N ≥||20-58||80-130|
|Attrition Rate||wt% ≤||0.1||0.1|
|Size Qualification||% ≥||98||98|
|Package Moisture||wt% ≤||1.5||1.5|
|The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A|
1. Used in oil gas, unsaturated hydrocarbon material dehydration of 3A molecular sieve professional.
2.For application in ethanol, methanol and other alcohol dehydration of 3A molecular sieve professional.
3. For ethanol dehydration of methanol, and 3A molecular sieve professional.
4.Used for natural gas dehydration and prevent the formation of COS.
5.Used for professional kerosene and jet fuel drying.
6.Application of 3a molecular sieve in isopropanol dehydration.
1. The product cannot be exposed in the open air and should be stored in dry condition with air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
About 3-15 days after the payment.