3a Molecular Sieve Remove The Impurity Of Cyclohexane From Normal Hexane
Product Description
3A molecular sieve has 3Å aperture,it can adsorb water but don’t adsorb any molecular whose diameter more than 3Å.3A molecular sieve has advantages of quick adsorption,good regeneration capacity,good crush strength and anti-pollution capacity,that increase 3A molecular sieve service efficiency and working life.It’s necessary desiccant for deeply drying, purification and polymerization of gas&liquid in petroleum and chemical industry.
Technical Index
Molecular Sieve 3A Typical Physical Properties | ||||
Item | Unit | 8*12 Mesh | 4*6 Mesh | |
Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
Bulk Density | g/ml ≥ | 0.70-0.82 | 0.65-0.80 | |
Equilibrium Water Capacity @ 25℃ | wt% ≥ | 19.0-21.0 | 19.0-21.0 | |
Equilibrium Ethylene Capacity | mg/g≤ | 3.0 | 3.0 | |
Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
Crush Strength | Point Contact | N ≥ | 20-58 | 80-130 |
Variation Coefficient | - | 0.3 | 0.3 | |
Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
Size Qualification | % ≥ | 98 | 98 | |
Package Moisture | wt% ≤ | 1.5 | 1.5 | |
The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A |
Main uses
1. Drying of unsaturated hydrocarbon,cracked gas,ethylene,acetylene,propylene and butadiene.
2. Drying of natural gas to produce minimization COS natural gas or adsorb carbohydrate.
3. Drying of highly polar compounds,such as methanol and ethanol.
4. Drying for Insulating glass containers filled by air or gases.
5. Dehydration of refrigerant.
Attention
1. The product cannot be exposed in the open air and should be stored in dry condition with air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
Packaging
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
Delivery Time
About 3-15 days after the payment.