3a Molecular Sieve Desiccant For Natural Gas Drying And LPG Dryer In Chemicals
Product Description
3A molecular sieve is an alkali metal aluminosilicate, it is the potassium form of the type A crystal structure. Molecular sieve 3A has an effective pore opening of about 3 angstroms. It could absorb the molecular which critical diameter is not more than 3 angstroms.
Technical Parameter
| Molecular Sieve 3A Typical Physical Properties | ||||
| Item | Unit | 8*12 Mesh | 4*6 Mesh | |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
| Bulk Density | g/ml ≥ | 0.70-0.82 | 0.65-0.80 | |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 19.0-21.0 | 19.0-21.0 | |
| Equilibrium Ethylene Capacity | mg/g≤ | 3.0 | 3.0 | |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
| Crush Strength | Point Contact | N ≥ | 20-58 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 | |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
| Size Qualification | % ≥ | 98 | 98 | |
| Package Moisture | wt% ≤ | 1.5 | 1.5 | |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A | ||||
Regeneration
1. 3A molecular sieve can be regenerated by either heating in the case of thermal swing processes, or by lowering the pressure in the case of pressure swing processes.
2. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerate molecular sieve can give moisture dew points below -100°C.
3. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Storage
The molecular sieve should be stored in dry condition with air-proof package, cannot be exposed in the open air, and prevented against water, acids and alkalis.
Packaging
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
Delivery Time
About 3-15 days after the payment.
