WINDOW GLASS DEWATERING ZEOLITE MOLECULAR SIEVE ADSORBENT PRODUCTION
Product introduction of Molecular Sieve Adsorbent:
Molecular sieves play a very important role in insulating glass. It is used to prevent condensation of water vapor on the inner surface of insulating glass, frost, evaporation of solvents in sealants, deflection under severe weather conditions, and hydrocarbons in the air such as paints, detergents, and other solvents. Because in the process of manufacture and use, the water vapor in the air will be sealed in the insulating glass. Condensation occurs when the ambient temperature drops below the dew point of the gas in the insulating glass. Condensation will form on the inside of the cold side of the insulating glass.
Technical Parameters of Molecular Sieve Adsorbent:
|Bulk Density||g/ml ≥||0.72-0.82||0.70-0.80||0.68-0.78|
|Equilibrium Water Capacity @ 25℃||wt% ≥||19.0-21.5||19.0-21.5||19.0-21.5|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||-||10-20||30-50|
|Dust(Turbidity Meter)||ppm ≤||30||30||30|
|Delt (10g/10ml H2O)||℃ ≥||38||38||38|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition(950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Package Moisture||wt% ≤||1.5||1.5||1.5|
|The interval value of the indexes above are based on the grades of Insulated Glass Drier|
Display of Molecular Sieve Adsorbent:
FAQ of Molecular Sieve Adsorbent:
1. Q: Could we send a free sample for reference?
A: Yes, of course. Don't hesitate. Go ahead & ask for a sample.
2. Q: What about the price and MOQ?
A: We promise the price is better competitive with good quality. we accept both large and small quantity orders.
3. Q: What is the lead time?
A: Within 20 days after the receipt of payment or L/C.
4. Q: Payment term?
A: 30% T/T in advance, 70% T/T balance before shipment.
5. Q: How to solve the quality problems after sales?
A: Take photos of the problems and send us. After confirmation, we will give a satisfying response within 3 days.
For more information please contact us. It's our pleasure to solve the question for you.
The attention of Molecular Sieve Adsorbent:
1. The product cannot be exposed in the open air and should be stored in dry condition with an air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.