HP Zeolite 13X Molecular Sieve Desiccant Manufacture For Petroleum Cracked Gas Drying
Product Introduction of 13X Molecular Sieve Desiccant:
Molecular sieve is an aluminosilicate compound with a cubic lattice. Molecular sieve has a uniform microporous structure, and its pore diameter is uniform. These pores can adsorb molecules smaller than their diameter into the interior of the pore cavity, and have preferential adsorption capacity for polar molecules and unsaturated molecules. Molecules with different degrees of sexuality, different degrees of saturation, different molecular sizes, and different boiling points are separated, that is, they have the function of "sieving" molecules, so it is called molecular sieve. Because molecular sieves have the advantages of high adsorption capacity, strong thermal stability, and other advantages that other adsorbents do not have, molecular sieves are widely used.
The molecular sieve produced by our company has the advantages of high strength, good thermal stability, and strong selective adsorption. Widely used in chemical, petrochemical, natural gas, and other industries, good feedback from users.
Technical Index of 13X Molecular Sieve Desiccant:
Molecular Formula | Na2O·Al2O3·(2.8±0.2)SiO2 ·(6-7)H2O |
SiO2/ Al2O3 | ≈ 2.6-3.6 |
Normal Pore Opening | 10 Angstroms (Å) |
Regeneration temp. (°C) | 200-315 |
Advantages | High Stability; High Crush Strength; Large Water Absorption; Low Attrition; Deep Dehydration |
Molecular Sieve 13X Typical Physical Properties | ||||
Items | Unit | 8*12 Mesh | 4*6 Mesh | |
Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
Bulk Density | g/ml ≥ | 0.68-0.85 | 0.65-0.80 | |
Equilibrium Water Capacity @ 25℃ | wt% ≥ | 24.0-27.0 | 24.0-27.0 | |
Equilibrium Carbon Dioxide Capacity | wt% ≥ | 18 | 18 | |
Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
Crush Strength | Point Contact | N ≥ | 30-80 | 80-130 |
Variation Coefficient | - | 0.3 | 0.3 | |
Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
Size Qualification | % ≥ | 97 | 97 | |
Package Moisture | wt% ≤ | 1.5 | 1.5 | |
The interval value of the indexes above are based on the different grades of Molecular Sieve 13X |
Product Photo of 13X Molecular Sieve Desiccant:
Applications of 13X Molecular Sieve Desiccant:
1. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for medical oxygen in small-scale
oxygen concentrators;
2. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG removal of mercaptans and hydrogen
sulfide from natural gas;
3. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for the deep drying of general gas
(such as compressed air, permanent gases);
4. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG ammonia synthesis gas drying, and
purification, production of bulk oxygen in PSA units;
5. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG is applied in the desiccating process
of industrial gas and gas purification in air separation unit;
6. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG removed CO2 in cracked gas, air plant feed purification (simultaneous removal of H2O and CO2);
7. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG has the characteristics of high CO2
adsorption capacity, low regeneration temperature, and long service life;
8. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for desulfurization aerosol propellant
deodorant and removal of n-chained composition from aromatics;
9. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG dehydration, and desulfuration of natural
gas, liquefied petroleum gas(LPG), liquid alkane, and liquefied hydrocarbon;
10. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for natural gas, liquefied petroleum
gas, liquid paraffin (propane, butane) dehydration, and desulphurization (removal of H2S and mercaptan).
The Attention of 13X Molecular Sieve Desiccant:
1. Xi'an Lvneng molecular sieve 13X desiccant cannot be exposed in the open air and should be stored in dry condition with the air-proof package.
2. Xi'an Lvneng molecular sieve 13X desiccant should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°c.
FAQ of 13X Molecular Sieve Desiccant:
Q: Could we send a free sample for reference?
A: Yes, of course. Don't be shy, go ahead asking for a sample.
Q: What about the price and MOQ?
A: We promise a competitive price with top quality. We accept both large and small quantity orders.
Q: What is the lead time?
A: Within 15 days after the receipt of payment or L/C.
Q: Payment term?
A: 30% TT in advance, 70% TT balance before shipment.
Q: How to solve the quality problems after sales?
A: Take photos of the problems and send us. After confirmation, we will make a satisfying solution soon.
For More information please contact us. It's our pleasure to serve you.