Insulating Glass Zeolite Molecular Sieves 3A Desiccant 1.6-2.5mm
Product Description of Zeolite Molecular Sieves:
The product is for Insulating Glass(IG), used to adsorb continuously an amount of moisture from the interspaces, maintains clean and transparent even at very low temperatures, minimizes pressure changes from seasonal and diurnal temperature difference which can eventually lead to distortion of IG or even broken. As a result, our product can fully extend the lifetime of IG units by completely solving the distortion problems which ordinary IG desiccants find difficult to deal with. Due to the development of material science and the application of new materials, the products are divided into synthetic zeolite adsorbents and natural zeolite adsorbents.
Insulating glass molecular sieve can co-adsorb the resident moisture and organics in insulating glass, keeping the insulating glass clear and transparent even at very low temperatures.
At the same time, it can successfully avoid the huge pressure difference placed on the glass, which is due to the huge change in temperature caused by the seasonal change and the shift of day and night, thus solving the problem of wind.
Technical Parameters of Zeolite Molecular Sieves:
|Insulated Glass Drying Molecular Sieve Typical Physical Properties|
|Bulk Density||g/ml ≥||0.72-0.82||0.70-0.80||0.68-0.78|
|Equilibrium Water Capacity @ 25℃||wt% ≥||19.0-21.5||19.0-21.5||19.0-21.5|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||-||10-20||30-50|
|Dust(Turbidity Meter)||ppm ≤||30||30||30|
|De4lta T*(10g/10ml H2O)||℃ ≥||38||38||38|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition(950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Package Moisture||wt% ≤||1.5||1.5||1.5|
|The interval value of the indexes above are subjected to grades of Insulated Glass Desiccant|
Photo of Zeolite Molecular Sieves: