Specialized HP Zeolite 13X Molecular Sieve Desiccant For Oxygen Generator Production
Product Introduction of 13X Molecular Sieve Desiccant:
The pore size of 13X molecular sieve is 10A, and the adsorption is greater than 3.64A and less than 10A. It can be used for catalyst co-carrier, co-adsorption of water and carbon dioxide, co-adsorption of water, and hydrogen sulfide gas. It is mainly used in the drying of medicine and air compression systems. There are different varieties of applications. Application of 13X molecular sieve
1. Gas purification in air separation device, removal of water and carbon dioxide.
2. Drying and desulfurization of natural gas, liquefied petroleum gas, liquid hydrocarbons.
3. General gas deep drying Main application areas: 13X type is used in industry for general Deep drying of gas, deep adsorption of water and carbon dioxide in air separation units, and desulfurization of natural gas; all molecules that can be adsorbed on 3A/4A/5A molecular sieves can be adsorbed on 13X type; it can also be used as catalyst carrier, water, and Carbon dioxide co-adsorption, water and hydrogen sulfide gas co-adsorption, air pretreatment for cryogenic oxygen production; drying of medicine and air compression systems, etc.
Technical Index of 13X Molecular Sieve Desiccant:
Molecular Formula | Na2O·Al2O3·(2.8±0.2)SiO2 ·(6-7)H2O |
SiO2/ Al2O3 | ≈ 2.6-3.6 |
Normal Pore Opening | 10 Angstroms (Å) |
Regeneration temp. (°C) | 200-315 |
Advantages | High Stability; High Crush Strength; Large Water Absorption; Low Attrition; Deep Dehydration |
Molecular Sieve 13X Typical Physical Properties | ||||
Items | Unit | 8*12 Mesh | 4*6 Mesh | |
Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
Bulk Density | g/ml ≥ | 0.68-0.85 | 0.65-0.80 | |
Equilibrium Water Capacity @ 25℃ | wt% ≥ | 24.0-27.0 | 24.0-27.0 | |
Equilibrium Carbon Dioxide Capacity | wt% ≥ | 18 | 18 | |
Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
Crush Strength | Point Contact | N ≥ | 30-80 | 80-130 |
Variation Coefficient | - | 0.3 | 0.3 | |
Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
Size Qualification | % ≥ | 97 | 97 | |
Package Moisture | wt% ≤ | 1.5 | 1.5 | |
The interval value of the indexes above are based on the different grades of Molecular Sieve 13X |
Product Photo of 13X Molecular Sieve Desiccant:
Applications of 13X Molecular Sieve Desiccant:
1. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for medical oxygen in small-scale
oxygen concentrators;
2. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG removal of mercaptans and hydrogen
sulfide from natural gas;
3. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for the deep drying of general gas
(such as compressed air, permanent gases);
4. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG ammonia synthesis gas drying, and
purification, production of bulk oxygen in PSA units;
5. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG is applied in the desiccating process
of industrial gas and gas purification in an air separation unit;
6. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG removed CO2 in cracked gas, air plant feed purification (simultaneous removal of H2O and CO2);
7. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG has the characteristics of high CO2
adsorption capacity, low regeneration temperature, and long service life;
8. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for desulfurization aerosol propellant
deodorant and removal of n-chained composition from aromatics;
9. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG dehydration, and desulfuration of natural
gas, liquefied petroleum gas(LPG), liquid alkane, and liquefied hydrocarbon;
10. High-quality Zeolite Molecular sieve 13X for Oxygen PSA, LPG used for natural gas, liquefied petroleum
gas, liquid paraffin (propane, butane) dehydration, and desulphurization (removal of H2S and mercaptan).
The Attention of 13X Molecular Sieve Desiccant:
1. Xi'an Lvneng molecular sieve 13X desiccant cannot be exposed in the open air and should be stored in dry condition with the air-proof package.
2. Xi'an Lvneng molecular sieve 13X desiccant should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°c.
FAQ of 13X Molecular Sieve Desiccant:
Q: Could we send a free sample for reference?
A: Yes, of course. Don't be shy, go ahead asking for a sample.
Q: What about the price and MOQ?
A: We promise a competitive price with top quality. We accept both large and small quantity orders.
Q: What is the lead time?
A: Within 15 days after the receipt of payment or L/C.
Q: Payment term?
A: 30% TT in advance, 70% TT balance before shipment.
Q: How to solve the quality problems after sales?
A: Take photos of the problems and send us. After confirmation, we will make a satisfying solution soon.
For More information please contact us. It's our pleasure to serve you.