Zeolite Molecular Sieves 13x Is Used For Drying And Purifying
Products Introduction
An oxygen generator is a machine that generates the oxygen from an ambient air to an oxygen enriched gas mixture using the PSA (Pressure Swing Adsorption) process. Such type of oxygen generator is typically used in healthcare applications. Molecular sieve for oxygen generator is effective to separate any kind of liquid or nitrogen from the oxygen. Molecular sieve 13X in the form of beads and pellets are the key elements to perform adsorption tasks perfectly. Such types of molecules are specially designed to desiccant the pores with larger size molecules. It is the most reliable desiccant for oxygen PSA process.
Molecular sieve for oxygen generator with the help of PSA process is used from the last several years to produce the highly pure oxygen for the patient’s ambulatory medical use. They are widely used in removing CO2 natural gas and LPG, for separating enriched oxygen from air, for removing oxygenates from hydrocarbons etc. The dew point of oxygen generated by the PSA process is -50 to -75 degree Celsius based on the size of the oxygen generator. Generate PSA rich oxygen with the help of the sodium form of the type X crystal successfully.
Technical Index:
| Molecular Sieve 13X Typical Physical Properties | ||||
| Items | Unit | 8*12 Mesh | 4*6 Mesh | |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
| Bulk Density | g/ml ≥ | 0.68-0.85 | 0.65-0.80 | |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 24.0-27.0 | 24.0-27.0 | |
| Equilibrium Carbon Dioxide Capacity | wt% ≥ | 18 | 18 | |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
| Crush Strength | Point Contact | N ≥ | 30-80 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 | |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
| Size Qualification | % ≥ | 97 | 97 | |
| Package Moisture | wt% ≤ | 1.5 | 1.5 | |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 13X | ||||
Attention please:
1. The product cannot be exposed in the open air and should be stored in dry condition with the air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
