High Adsorption Rate Wear Proof Zeolite Molecular Sieve Adsorbent For Hollow Glass
Product Introduction of Molecular Sieve Adsorbent:
Molecular sieve refers to a uniform micropore, its aperture, and the general molecular size of a class of substances. Molecular sieve applications are very wide, can be efficient desiccant, selective adsorbent, catalyst, ion exchanger, etc
Molecular sieve is an ideal adsorbent for insulating glass. Molecular sieve is a porous structure with a very large internal surface area.It has an affinity for both water and solvents. Decades of experience in insulating glass manufacturing show that sealants and adsorbents interact and affect each other's performance. Through continuous research and development, the company finely adjusts each product in the special use of molecular sieve for insulating glass, so that it can provide the exact performance required by each sealant system.
Technical Parameters of Molecular Sieve Adsorbent:
|Bulk Density||g/ml ≥||0.72-0.82||0.70-0.80||0.68-0.78|
|Equilibrium Water Capacity @ 25℃||wt% ≥||19.0-21.5||19.0-21.5||19.0-21.5|
|Equilibrium Nitrogen Capacity||mg/g ≤||2.0||2.0||2.0|
|Adsorption Heat||BTU/lb of H2O||1800||1800||1800|
|Crush Strength||Point Contact||N ≥||-||10-20||30-50|
|Dust (Turbidity Meter)||ppm ≤||30||30||30|
|Delt (10g/10ml H2O)||℃ ≥||40||40||40|
|Dew Point||℃ ≤||-73||-73||-73|
|Loss of Ignition (950℃)||wt% ≤||2||2||2|
|Size Qualification||% ≥||96||96||96|
|Packing Moisture||wt% ≤||1.5||1.5||1.5|
|The interval value of the indexes above are based on the grades of Insulated Glass Drier|
Picture of Molecular Sieve Adsorbent:
FAQ of Molecular Sieve Adsorbent:
1. Q: Could we send a free sample for reference?
A: Yes, of course. Don't hesitate. Go ahead & ask for a sample.
2. Q: What about the price and MOQ?
A: We promise the price is better competitive with good quality. we accept both large and small quantity orders.
3. Q: What is the lead time?
A: Within 20 days after the receipt of payment or L/C.
4. Q: Payment term?
A: 30% T/T in advance, 70% T/T balance before shipment.
5. Q: How to solve the quality problems after sales?
A: Take photos of the problems and send us. After confirmation, we will offer a proposal within 3 days.
For more information please contact us. It's our pleasure to serve you.
The attention of Molecular Sieve Adsorbent:
1. The product cannot be exposed in the open air and should be stored in dry condition with an air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.