Payment & Shipping Terms:
|Nominal Pore Diameter:||4 Angstroms||Stacking Density:||680-700G/L|
activated carbon pellets,
activated carbon desiccant
PSA Nitrogen Adsorbent (CMS-220) Carbon Molecular Sieve Carbon Adsorbent High Adsorption Capacity
Nitrogen generation by Pressure Swing Adsorption (PSA) process is a technology used to separate nitrogen from a mixture of gases under pressure according to the special selective adsorption characteristics of the Carbon Molecular Sieves (CMS).
The Carbon molecular sieve is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases. When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure. Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air.
|N2 concentration||Nitrogen production volume||Air and nitrogen ratio|
|Particle Diameter||1.1-1.2MM||Stacking Density||680-700G/L||Test Temperature|
|Adsorption Time||2X50S||Compression Strength||≥75N/Particle||≤20℃|
PSA Nitrogen Generation Process
1) Air Feed System
The environmental air supplied to the PSA system should be compressed and purified to get rid of the dust, the oil and water.
2) PSA Nitrogen Generation System
While the compressed and purified air flows through the adsorbent bed with CMS inside in a bottom-up way under the pressure of 0.6MPa, the oxygen molecules will be absorbed by the solid surfaces of the CMS, and the enriched nitrogen will be output from the top of the bed to the container.
When the adsorbent bed reaches the end of its capacity to absorb oxygen, it can be regenerated by reducing the pressure, thereby releasing the adsorbed oxygen. Using two adsorbent beds to absorb and regenerate in turn allows producing continuous nitrogen in the cycle.
The molecular sieve shall be stored at room temperature, in which the relative humidity is not exceed 90%, and be not exposed in air, and prevented against water, acids and alkalizes.
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
About 3-15 days after the payment.
Contact Person: cooperfan