Payment & Shipping Terms:
|Size:||2.0-3.0 Mm ; 3.0-5.0 Mm ;4.0-6.0 Mm||Ethylene Adsorption:||≤3.0mg/g|
|Purity:||98%||Certificate:||SGS & REACH|
molecular sieve type 3a,
3 angstrom molecular sieves,
98% purity 3a molecular sieve
Good Absorption 3a Molecular Sieve Desiccant Using Oil Industry Drying
3A Molecular Sieve, has an effective pore opening of about 3 angstroms(0.3nm).
This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers.
It has the advantages of faster adsorption speed, more regeneration times, higher crushing strength, stronger anti-pollution ability, greater utilization efficiency and longer service life.
Chemical Molecular Formula : 0.4K2O·0.6Na2O·Al2O3·2SiO2··4.5H2O. (SiO2 : Al2O3 ≈2).
|Molecular Sieve 3A Typical Physical Properties|
|Item||Unit||8*12 Mesh||4*6 Mesh|
|Bulk Density||g/ml ≥||0.70-0.82||0.65-0.80|
|Equilibrium Water Capacity @ 25℃||wt% ≥||19.0-21.0||19.0-21.0|
|Equilibrium Ethylene Capacity||mg/g≤||3.0||3.0|
|Heat of Adsorption||BTU/lb of H2O||1800||1800|
|Crush Strength||Point Contact||N ≥||20-58||80-130|
|Attrition Rate||wt% ≤||0.1||0.1|
|Size Qualification||% ≥||98||98|
|Package Moisture||wt% ≤||1.5||1.5|
|The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A|
a) Be mainly used for the drying of petroleum cracking gas such as ethylene, propylene, butadiene and others.
b) Drying of highly polar compounds, such as methanol and ethanol.
c) Drying of air.
d) Drying of natural gas and methane gas.
1. The product cannot be exposed in the open air and should be stored in dry condition with air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
About 3-15 days after the payment.
Contact Person: cooperfan