MOLECULAR SIEVE ADSORBENT MANUFACTURE FOR HIGH-PRESSURE INSULATED GLASS
Product Description of Molecular Sieve Adsorbent:
Insulating Glass(IG), Molecular sieve is used to adsorb continuously an amount of moisture and organics from the interspaces, maintains clean and transparent at a low air temperature. Minimizes pressure changes from seasonal and temperature differences which can eventually lead to distortion of IG or even broken. As a result, our product can fully extend the lifetime of the IG units by completely solving the distortion problems which ordinary IG desiccants find difficult to deal with. Due to the improvement of material science and its application, the products are divided into artificial zeolum adsorbent and natural thomsonite adsorbent.
Meanwhile, it can completely prevent atmospheric pressure differences on the glass, which was caused by the great change in temperature. because of the seasonal variation and day and night transformation, thereby, it resolves the problems of windows distortion by insulating glass inflation and shrinks, the service life of insulating glass windows will be extended.
Technical Parameter of Molecular Sieve Adsorbent:
Insulated Glass Drying Molecular Sieve Typical Physical Properties | |||||
Items | Unit | Value | |||
Bead Size | mm | 0.5-1.0 | 1.0-1.5 | 1.5-2.0 | |
Bulk Density | g/ml ≥ | 0.72-0.82 | 0.70-0.80 | 0.68-0.78 | |
Equilibrium Water Capacity @ 25℃ | wt% ≥ | 19.0-21.5 | 19.0-21.5 | 19.0-21.5 | |
Equilibrium Nitrogen Capacity | mg/g ≤ | 2 | 2 | 2 | |
Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | 1800 | |
Crush Strength | Point Contact | N ≥ | - | 10-20 | 30-50 |
Variation Coefficient | - | 0.3 | 0.3 | 0.3 | |
Dust(Turbidity Meter) | ppm ≤ | 30 | 30 | 30 | |
Delta T*(10g/10ml H2O) | ℃ ≥ | 38 | 38 | 38 | |
Dew Point | ℃ ≤ | -73 | -73 | -73 | |
Loss of Ignition(950℃) | wt% ≤ | 2 | 2 | 2 | |
Size Qualification | % ≥ | 96 | 96 | 96 | |
Package Moisture | wt% ≤ | 1.5 | 1.5 | 1.5 | |
The interval value of above indexes are based on the grades of Insulated Glass Desiccant |
Profile Display of Molecular Sieve Adsorbent:
FAQ of Molecular Sieve Adsorbent:
1. Q: Could we send a free sample for reference?
A: Yes, of course. Don't be shy, go ahead asking for a sample.
2. Q: What about the price and MOQ?
A: We promise the price is the most competitive with top quality. The small MOQ can be accepted.
3. Q: What is the lead time?
A: Within 15 days after the receipt of payment or L/C.
4. Q: Payment term?
A: 30% T/T in advance, 70% T/T balance before shipment.
5. Q: How to solve the quality problems after sales?
A: Take photos of the problems & send us. After confirmation, we will make a satisfying solution within 3 days.
For more information please contact us. It's our pleasure to solve the question for you.
The attention of Molecular Sieve Adsorbent:
1. The product cannot be exposed in the open air and should be stored in dry condition with an air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.