Payment & Shipping Terms:
|Color:||Beige||Size:||2.0-3.0mm; 3.0-5.0mm; 4.0-6.0mm|
|Package Moisture:||≤ 1.5%||Equilibrium Water Capacity:||≥ 22%|
oxygen molecular sieve,
molecular sieves for water removal
Zeolite Molecular Sieve 13x 4*8mesh Beads For Natural Gas Drying And Desulfurization
Xi'an Lvneng 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 10 Angstrom (1.0 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.
Physical and Chemical properties
|Molecular Sieve 13X Typical Physical Properties|
|Items||Unit||8*12 Mesh||4*6 Mesh|
|Bulk Density||g/ml ≥||0.68-0.85||0.65-0.80|
|Equilibrium Water Capacity @ 25℃||wt% ≥||24.0-27.0||24.0-27.0|
|Equilibrium Carbon Dioxide Capacity||wt% ≥||18||18|
|Heat of Adsorption||BTU/lb of H2O||1800||1800|
|Crush Strength||Point Contact||N ≥||30-80||80-130|
|Attrition Rate||wt% ≤||0.1||0.1|
|Size Qualification||% ≥||97||97|
|Package Moisture||wt% ≤||1.5||1.5|
|The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 13X|
a) Removal of CO2 and moisture from air (air pre-purification) and other gases.
b) Separation of enriched oxygen from air.
c) Removal of n-chained compositions from aromatics.
d) Removal of R-SH and H2S from hydrocarbon liquid streams (LPG, butane etc.)
e) Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams).
f) Production of bulk oxygen in PSA units.
Xi'an Lvneng molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
Packaging & Shipping
Packing specification: 25kg plastic woven bag or ton bag or bucket packaging, also can be packed according to your requirement.
Product transport requirements: keep dry, away from inflammable, corrodible, toxic goods.
Contact Person: cooperfan