Payment & Shipping Terms:
|Name:||13X Molecular Sieve Desiccant||Feature:||High Purity|
|CO2 Absorption:||18.0||Static Adsorbed Water:||25.0%|
|Attrition Rate:||≤ 0.1%||Application:||Dryer Agent|
uop molecular sieve 13x,
High Purity 13X Molecular Sieve Desiccant As Dryer Agent Gas Deep Drying
13X Molecular Sieve Desiccant Introduction
Molecular sieve has a uniform microporous structure, this pore with uniform size,molecule is smaller than the diameter of the molecules can be adsorbed into the cavity of the internal by these pore,and have a preferential adsorption capacity for polar molecules and unsaturated molecules,So the different degree of polarity, different degrees of saturation, different molecular size and different boiling points of the molecules can be separated, that is, with the "sieving" the role of molecules, so called molecular sieve.
A main component of X-type molecular sieve is aluminosilicate, silicon-oxy and alumina tetrahedron to form a FAU-type structure the main crystal structure is twelve membered rings.
In molecular sieve 13X, sodium ion formation with a pore opening of 9-10Å (1Å=1×10-10m), that is type 13X (also known as NaX-type) molecular sieve.
13X Molecular Sieve Desiccant Technical Parameter
|Molecular Sieve 13X Typical Physical Properties|
|Items||Unit||8*12 Mesh||4*6 Mesh|
|Bulk Density||g/ml ≥||0.68-0.85||0.65-0.80|
|Equilibrium Water Capacity @ 25℃||wt% ≥||24.0-27.0||24.0-27.0|
|Equilibrium Carbon Dioxide Capacity||wt% ≥||18||18|
|Heat of Adsorption||BTU/lb of H2O||1800||1800|
|Crush Strength||Point Contact||N ≥||30-80||80-130|
|Attrition Rate||wt% ≤||0.1||0.1|
|Size Qualification||% ≥||97||97|
|Package Moisture||wt% ≤||1.5||1.5|
|The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 13X|
13X Molecular Sieve Desiccant Application
1 Natural gas, liquefied petroleum gas, liquid hydrocarbon drying and desulfurization
2 General gas deep drying
1. 25 Kg/Carton Barrel
2. 150 Kg/ Sealed Iron Drum
The molecular sieve shall be stored at room temperature, in which the relative humidity is not exceed 90%, and be not exposed in air, and prevented against water, acids and alkalizes.
Contact Person: cooperfan